Basic Info.
Classification
Lighting/Power
Standby UPS
Sine Wave Output UPS
Equipment Mode
Centralized Model
Transport Package
Wooden Case
Product Description
Application:
Servers, Local area Network(LAN), Data centers, Telecommunications, Electro-medical equipment
CNG310 series Low Frequency Online UPS 10-100KVA
Model:CNG310 10-100KVA(3Ph/1Ph)
Nominal Input Voltage: 380/400/415VAC
Output Power Factor:0.8
High intelligence and reliable power supply:
CNG310 provides maximum protection for vital mission-critical networks, security applications (electro- medical)and industrial applications thanks to its outstanding mechanical and electrical design.
The load is powered continuously by the inverter with a filtered, stabilised and regulated sine wave supply. The input and output EMI filters considerably increase the immunity of the load to mains disturbances and surges.
The CNG310 uses on-line double conversion technology (VFI) with isolation transformer on the inverter output.
The CNG310 is supplied with Watch & Save 3000 software as standard and can be remotely monitored
using the Power Net Guard system from anywhere in the world. Additional battery extension packs allow the standard battery runtime to be extended up to several hours.
MINIMUM IMPACT ON SUPPLIES EASY SOURSE:
Input current distortion <4% for the CNG310 with filter with sinusoidal absorption to remove the risk of resonance with other input supply users or phase shift capacitor sets. The absorbed current distortion is independent of input supply parameters such as impedance. This enable CNG310 to deliver maximum performance levels regardless of the installation environment. With these input features CNG310 can achieve significant savings in terms of sizing and power supply sourcesiso- ation transformers and generators over less sophisticated power systems.
MAXIMUM BATTERY CARE:
Battery deep discharge protection;
Temperature compensating charger;
Built-in automatic and manual battery test feature.
SIMPLE TO INSTALL:
Capability to install the UPS into any distribution system(neutral not required on rectifier input);
Capability to separate the rectifier/bypass power networksand to power these from two separate sources, withoutGalvanic isolation (Necessary on UPS without an outputtransformer).
HIGH RELIABILITY:
Extremely high short-circuit current to ensure compatibilitywith the most difficult transformer applications (lighting,drives and industrial processes) and an isolation transformeron the inverter output;
Full microprocessor control with no-break static andmanual bypasses;
IGBT technology.
OTHER CHARACTERISTICS:
0.8 power factor make CNG310 suitable for powering ICT and Industrial loads;
High level diagnostics: event log with 128 messages, states,measurements and alarms - available from the built-in LCD with several languages;
BACK FEED protection: to avoid energy feeding back into the mains supply cause a fault occur.
MAXIMUM RELIABILITY AND AVILABILITY:
Connect up to 6 units in parallel or N+1 redundancy, even of different power ratings.The UPS continue to work in parallel even if one of the interconnecting communication cables is disconnected (CLOOSED LOOP).
LOW CONSUMPTION LEVELS:
CNG310 can achieve efficiencies >98% thanks to selectable Economy Mode which can be used in stable electrical environments to provide power supply continu- ity when the mains fail.
ADVANCE COMMUNICATION:
Compatible with TeleNetGuard for remote maintenance;
Advanced, multi-platform communication for all operation systems and network environments: Watch & Save 3000 monitoring and shut-down software included, with SNMP agent, for Windows 2008, Vista,2003, XP; Mac OS X,Linux, Novell and most popular Unix operating systems;
The UPS is supplied with a cable for direct connection to the PC(Plug and Play);
RS232 double Serial port;Installation slot for an Emergency Power Off (EPO) interface to allow the UPS to be switched off remotely in an emergency;
Generator interface: enables desynchronisation of the UPS output from a generator supply which may be subject to phase and frequency variations. The interface also enables more economic use of the battery charge.
EXPANDABILITY :
The units can be connected in parallel up to 8 units to increase power availability or redundancy. The single
module or the system can be expanded any time to suit power requirements without influencing the initial investment.
Technial parameter of CNG310 series:
Model power | CNG310 10-100KVA |
10KVA | 15KVA | 20KVA | 30KVA | 40KVA | 60KVA | 80KVA | 100KVA |
Capacity | 8KW | 12 KW | 16 KW | 24 KW | 32 KW | 48 KW | 64 KW | 80 KW |
Input |
Rated voltage | 380/415 Vac three-phase |
Voltage range | ±20% |
Frequency range | 45÷65Hz |
Power factor | >0.92with harmonic filter |
Current harmonic distortion | <5%with harmonic filter |
Soft Start | 0-100% in10" |
Bypass Input |
Rated voltage | 230Vac single-phase |
Permitted voltage range | ±15%(selectable from ±10% to ±25% from front panel) |
Rated frequency | 50/60Hz |
Permitted frequency range | ±2%(selectable from ±1% to ±5% from front panel) |
Standard features | BackFeed portection; split bypass line |
Batteries |
Type | Maintenance-free lead-acid VRLA AGM / GEL;NICd |
Battery Voltage | 384VDC |
Maximum recharge current(A) | 0.2 X C10 |
AC ripple voltage | <1% |
Inverter output |
Rated power(kVA) | 10KVA | 15KVA | 20KVA | 30KVA | 40KVA | 60KVA | 80KVA | 100KVA |
Active power(kW) | 8KW | 12 KW | 16 KW | 24 KW | 32 KW | 48 KW | 64 KW | 80 KW |
Number of phases | 1 |
Rated voltage(V) | 230Vac single-phase |
Regulation of the output voltage | 220÷244Vac phase/neutral(from contril panel) |
Crest factor(Ipeak/Irms) | 3:1 |
Static stability | ±1% |
Dynamic stability | ±5% |
Frequency | 50/60Hz configurable |
Overload | 110% 125% 150% of the rated current for 5h/10'/1' |
Frequency stability | ±0.05% on mains failure |
System | 10KVA | 15KVA | 20KVA | 30KVA | 40KVA | 60KVA | 80KVA | 100KVA |
Remote signaling | Volt free contacts |
Remote controls | EPO and Bypass |
Communication | RS232 + romote contacts |
Operation temperature | 0ºC/ + 40ºC |
Relative humidity | <95% non condensing |
Colour | Light grey (RAL 7035) |
Noise | 54dBA at 1m | 60dBA at 1m | 65dBA at 1m |
Protection degree | IP20 |
Efficiency Smart Mode | up to 98% |
Compliance | Safety:EN 62040-1-1(Directive 2006/95/EC); EMC:6200-2(Directive 2004/108/EC) |
Weight(KG)N.W | 176 | 220 | 205 | 213 | 295 | 440 | 520 | 770 |
Dimensions:(WxDxH)mm | 555*730*1210 | 800*730*1400 | 1115*730*1400 |
Internal batteries | Yes | Yes | Yes | No | No | No | No | No |
Address:
Building B6, Junfeng Industrial Park, Fuhai Sub-Distric, Bao′an District, Shenzhen City, Guangdong Province, 518103 P. R. China, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Security & Protection
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
Shenzhen CONSNANT Technology Co., Ltd. (simple name: CONSNANT) is a professional manufacturer engaged in research, development and production of UPS (Uninterruptible Power Supply) including the Modular UPS, Outdoor & Indoor UPS, Industrial special UPS, Low Frequency & High Frequency Online UPS and Solar Power System both for home appliance and telecom equipments.
Our product has obtained the CE, ISO 9001, ISO 14001 and local Chinese TLC certificates. Having reached good sales results in China, we are now expanding our sales overseas.
We are proud of the fact that most of our company′s engineering staff is well-qualified and has gained experience in relevant fields more than 10 years. In order to protect your equipment from electrical supply network instability, we offer innovative solutions that obtain higher availability systems, improve efficiency and offer flexible solutions to meet specific needs and range of application. The UPS product is widely used in data and computing centers, finance institutions, banks, within industry and medical fields.
We welcome any kind of collaboration, will enjoy any opportunities of dealing with new costumers: From distributors to ultimate consumers, undertake both wholesale and retail orders, including the sale of finished goods or parts.
If you start work with us, you will not only get high-quality product at reasonable price, but also maintain the profitable conditions for further years.
We are located in the world-famous High-Tech center - Shenzhen city, China. Our factory is close to airport. If you are lucky to visit the city, you are kindly welcomed to visit our factory.